transmission fluid for NT 304
homesteader
Join Date: Jan 2008 Posts: 7 West Virginia |
2008-10-19 157360
I have a Nor-Trac NT 304 I have not been able to find the Transmission fluid that is in the manual. API Service: CF/SL -30W. Someone told me (store clerk) that it was motor oil is that correct. I will appreciate any info you can give me on this.
Thank you Tom Hicks
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky Pics |
2008-11-03 157630
Like I tried to tell you in the Nortrac forum last month; Chinese tractor questions don't do well outside the Chinese tractor forums.
//greg// ....
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2008-11-03 157633
Tom, I'm a little confused by your post.
You stated the API service standard that the manual calls for, but you say you can't find it?
Do you mean you physically can't get your hands on it? I'm not sure that's the case though because you say you were talking to a store clerk, so presumably you were at a store with an auto parts section.
If that's the case the shelves would have been full of that oil, it's REALLY common stuff.
Best of luck. ....
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky Pics |
2008-11-03 157634
Murf -
The Chinese-English translated manuals (Chinglesh) that come with these tractors can be highly misleading. Literally translated from the Chinese, the books say to put 30W diesel-rated engine oil into the gear boxes. Obviously, the North American solution is to ignore what the Chinese use in their domestic tractors, and use conventional gear oil in their exports.
The same Chinglish manuals say to use the same 30W diesel-rated engine oil in the hydraulics too. Given the wide availability of proper hydraulic fluids in North America, those instructions should be ignored as well.
//greg// ....
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon Pics |
2008-11-03 157637
Quote:
|
Are there any tractors that use 30W motor oil for hydraulics? Our Bandit chipper uses 30 gallons of 30 weight. ....
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky Pics |
2008-11-03 157638
Quote:
|
30W is way too thick for winter use in these Chinese tractors. With fluid that thick, you have to waste a good 15 minutes worth of fuel waiting for the hitch and/or loader to work, or even for the steering wheel to turn. I find AW32 is typically called for in cool to moderate climates, and AW46 or AW68 is often chosen in moderate to warm climates.
//greg// ....
Reply to | Quote Reply | Add Photo
transmission fluid for NT 304
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2008-11-04 157646
Thanks Greg, that explains it.
Our hydrostat commercial mowers all run straight 30W oil in the hydraulic system.
Best of luck. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This